Propane
High Pressure Propane Installation
STATIONARY
All HIGH PRESSURE PROPANE kits are packaged for
stationary use and most
customers purchase the connection hose and
quick disconnect for this easy connection. . Most
often STATIONARY propane systems will have a high pressure regulator at the tank and a low
pressure regulator where the gas enters the home. The basic TYPE 1 and TYPE 2
Kit is
designed to tie into the gas line from the high pressure side of the system,
between the propane tanks and the home. This same generator can be used
portably and a PGK accessory is required and can be found on our accessories
page.
To
use your generator portably as shown:
12hp
or smaller engine order a Type A, B, C or C Kit and the NPSK 6' or
12' hose accessory
13hp
or larger engine order a Type 1
or 2 and the PGK 6' or 12' hose accessory
13hp
or larger engine order a Type 3 or 4 and the NPSK 6' or 12' hose
accessory
PORTABLE
All LOW PRESSURE PROPANE kits are also packaged for
stationary use and most
customers also order the 1/2" connection hoses,
1/2" quick disconnect or other accessories.
As mentioned above, most
often, STATIONARY propane systems will have a high pressure regulator at the tank and a low
pressure regulator where the gas enters the home. Some just have a single low
pressure regulator at the tank (like campers with a change over 2 stage
regulator and bbq-grills with a silver single stage regulator, etc.) The basic
Type A KIT and
Type C KIT and the TYPE 3 and
TYPE 4 KITS are
designed to tie into the gas line at the LOW pressure side of the system.
The low pressure is regulator where the gas enters the home. This same
generator can be used portably and an NPSK accessory is required and can be
found on our accessories page.
As mentioned, the same generator can also be used portably as described below.
All kit types also allow
the generator to be used portably with propane cylinders of any size. This
requires a
PGK for high pressure Type 1
and 2 kits or NPSK
for low pressure Type 3, 4 and the Type A and C kits. These
accessories have everything needed to use a generator on portable bottles or to
allow a
permanently installed generator to be disconnected and used portably with any
size of portable LP Gas cylinder.
Low Pressure Propane Installation
If you want to connect to the Low Pressure side of a LP Gas system, then
a Low Pressure Propane Kit
will be required.
The Type 3 and 4 kits and the Type A and C Kit s are for low pressure
propane which is the same kits used for natural gas.
