Note: Electric start generators use the same Kits
as pull start
If you're not sure what each type
means, click on the Quick Help Links
to the left for more details.
Accessories can be ordered using
this link: ACCESSORIES
Ordering is easy. Simply choose
the type of kit you require based on your generator model. Clicking on the
appropriate Yes link
will take you to the order page. When you are checking out, type in all
the information you have about your engine and generator in the
information box of the order form.
NOTE: If
ANR
follows the Generator Number above, a kit is available but please read the
following information:
We have the correct parts for the engine and they work fine so it is not a
performance issue. However, there are two things you should know.
First, using bi-fuel with the single cylinder Generac engines requires that an
adapter be installed between the carburetor and the air cleaner. When
installed, the air cleaner is moved out one and one quarter inches
(1-1/4").
As designed, the gasoline choke lever that operates the choke
passes through the housing for easy access at the front of the housing.
When the adapter is added, the little plastic button on the tip of the
choke lever must be removed and lever must be cut off or bent up to allow the
closing and opening of the choke during use on gasoline while the adapter is
installed. It may be inconvenient but there is another option. If
the adapter was removed whenever gasoline was used, the modification
of the choke lever would not be necessary.
Secondly, the little rubber crank case vent hose must be extended by
adding a tube to make up for the increased distance. The rubber is cut,
and a tube is added.
Because of these extra requirements necessary to use adapters on these
engines, we list them as
ANR so that you are aware of the
issues prior to ordering.
Please use these links to order the kits listed as ANR
