Troy-Bilt
1925
Troy-Bilts new 1925
SAME AS BRIGGS 01894
with the
new style Briggs and Stratton 16hp OHV Vertical Engine.
Shown to the left with a Type 3 Kit installed.
New Feature: The Tech's Recommendation:
We recommend dedicating this carburetor because of the way Briggs
designed this engine on this model generator. The air filter assembly is
incorporated into to the upper air shroud and no adapter can be added into the
air stream. But for those that like to keep the gasoline option we offer a
US Carburetion exclusive; a swap out air duct elbow (shown below) that replaces
the original. We buy the black plastic elbows from Briggs and modify them
in our shop to meter the fuel. Just loosen some screws, slide the original
elbow off and slide the new one on and tighten the screws. Then one screw
is removed on the carburetor for vacuum and that is it.
Many of the terms in the chart below are hyperlinks to pages that will give a
full description of what the term means. If you're not sure what each type of
kit means, click on the
"Quick" Help Links
to the left
or the Simple
Explanation link above.
Please remember
that your credit card will not be processed until we review your order.
Every order is reviewed to verify that the kit choice and accessories are
appropriate for the Generator and application and then your kit is scheduled for
production. If we determine that an adjustment to your order is necessary,
a kit center representative will follow-up promptly with an e-mail or will call
to discuss the matter with you.
Accessories
like hook-up hoses, quick disconnects, portable cylinder connection parts, and
much more can be add to your cart by choosing the
"Continue Shopping" button before or after clicking on
your kit choice below. All kits and accessories are shipped for one
low fee. This includes multiple kits for combined orders. To view the available accessories
ahead of time please use the
ACCESSORIES
link above.
*Click
on the picture for a larger view. This
kit requires swapping out the original air duct assembly. Simply remove the black
plastic elbow that connects the air filter to the inlet of the carburetor and install the new
elbow which will arrive already equipped with use with alternate fuel.
There will be an additional $10 core charge for the elbow when the kit is
shipped. If the original elbow on the generator is in "very good"
condition or better and it is returned to us we will send a check for $10 when the elbow is received back
at the US Carburetion Kit Center and inspected. Paperwork with full instructions about
the core will be included with the kit for easy return.
All four types of kits are available for the Troy-Bilt
1925 generator with the Briggs and Stratton 16hp vertical engine and the Briggs
7000 Elite with the 15hp engine.
Clicking on the YES
link above
will allow you to add that particular type kit to your shopping cart.
Additional accessories can be ordered by choosing the
"Continue Shopping" button after clicking on the kit above. To view the available accessories
ahead of time use this link ACCESSORIES.
